Showing posts with label FACTORY POWERSPORTS ST. GEORGE UT. Show all posts
Showing posts with label FACTORY POWERSPORTS ST. GEORGE UT. Show all posts

Thursday, June 3, 2021

SLATER SKINS HIGH FLOW AIR BOX COVER

Hey Slater Company.  I would really like a Sponsorship and to promote the Slater Skins High Flow Air Box Cover.  I would literally promote the crap out of it and honestly, I could really use the extra power for my hole shots at my MX races.πŸ˜ŽπŸ˜„ 


Slater Skins High Flow Air box Cover


Slater Skins new air filter cover for the the 2018 2021 YZ 450F 2019 2021 YZ 250F. With the  increased air flow is a huge improvements over stock. Comes with washer clip to use with stock Dzus fastener 

$ 80.00 Made in the USA πŸ‡ΊπŸ‡Έ 

contact slaterskins@gmail.com or 203 878 2379 to order 

https://twitter.com/slaterskins/status/1319707637819297793?s=21


Hey everybody, if you have a Yamaha like mine, a 2021 Yamaha YZ250F, you really could use a Slater Skins High Flow Air box Cover.  Their information is above the photo.  Help me out here and order one and maybe that will help me get a much needed sponsorship.  Thanks,  Taylor


I need more power for my Hole Shots!  I'm running 91 Octane Ethanol Free gasoline.  Here is a quote from a mechanic on gas:

"Mechanic's Note: If your dirt bike or ATV engine is tuned to run at a higher octane you'll need to invest in higher octane fuel. For example, a higher compression piston could cause the fuel to detonate (causing knocking) rather than burn which affects performance. Check the owner's manual. Most non-ethanol based fuel is rated at 90 octane and recommended for Motocross bikes.

One type of gas to avoid, if at all possible, is ethanol-based. Yes, it is difficult nowadays to find gas that's not corn fed especially in certain parts of the country or during a specific time of year. If you have a choice, pay extra or go out of your way for straight-up gas, otherwise it's OK to use the ethanol-based. It works just fine and won't hamper performance. However, we advise NOT using an ethanol concentration above 10 percent.

The big concern using ethanol-based fuel is corrosion. Ethanol attracts moisture which overtime corrodes vital engine parts. Therefore, burn off all ethanol-based fuel in the tank, drain the tank or add a fuel stabilizer if left in the tank for long periods. Ethanol-based fuel eventually gels and clogs the jets."

I just don't want to run a gas (corn) product that messes up my engine so that's why I try to run the ethanol free but the higher octane is hard to find.  I might have to go to racing fuel for the races.

I need the power!


Saturday, April 10, 2021

891 SUSPENSION ON THE YAMAHA

 

891 SUSPENSION & PERFORMANCE

TJ took a photo of my bike ready to go.


Grandpa and I just picked up my Yamaha from TJ Bronson of 891 SUSPENSION located in Sandy, Utah.  I was spending spring break with grandpa and grandma with my sister, Katie, my cousin Presley and my girlfriend Piper down in Mesquite, Nevada.  We left early Friday morning and drove from Mesquite to Sandy just to pick the bike up.  I'm really excited to see the difference but still have a couple more weeks to get my strength back from the broken Fibula and muscle tear.  

https://891suspension.com/ 

email: TJ@891suspension.com  

phone: 801-824-1276

891 Suspension & Performance

OUT LAST THE COMPETITION WITH 891 SUSPENSION

What is 891 suspension & performance?

When I talk with other guys at the track I came to a conclusion that 891 Suspension & Performance is the best place to get the best set up for your dirt bike. With a specialty in suspension, TJ knows all the in's and out's to make your dirt bike handle better and believe me, safer! 

TJ will build each set of suspension to match your skill level, bike, and discipline. 

TJ also provides a wide range of services to help keep you out there riding. TJ has helped me with new tire installation, new tubes, new chain installation and new sprocket installation.  He can also do whole motor rebuilds and he knows what he’s doing. 

I know now that my problem with my brand new 2021 Yamaha YZ250F was suspension. I found out that most any handling issues can be fixed with basic suspension adjustments or in my case a rebuild to adjust for my size and weight.  I should have done the adjustments right when I got the new bike.  I might not have crashed and broke my leg.

From my point of view ask yourself; have you experienced any of these symptoms on your dirt bike during a race or ride?

Your rear wheel won’t track a line properly?

Your front wheel won’t track a line properly?

You’re losing some stability at high speeds?

You find that your front wheel won’t stay planted?

You’re finding that the rear wheel bucks too much?

Or even that your front end feels saggy and unresponsive?

I found out that my Yamaha bike’s stock suspension was tuned to work for a variety of riders and riding styles for a guy who might only weigh around 170 pounds; that didn’t work for me being over 5’11” and around 250 without gear. It’s a great mid-range setup for most guys that will get you out on the track with ease, but once you start pushing those stock settings you’ll often find they’re lacking in most of the critical areas. New bikes from brands like Yamaha are known for being well-balanced right out of the box, but I now know that even that new suspension will need a tune-up for a lot of riders.

So, my bike is done.  My broken leg is healed.  In a couple of weeks it’s time to test the new suspension from TJ at 891 Suspension.  Yeah, I’m excited.  


Monday, December 7, 2020

It's Yamaha Time!

 Today was one of the most fun days I've ever had riding a dirt bike.  After slowly breaking in my 2021 Yamaha YZ250F Monster Edition bike which seemed it "forever" I took it easy on the first day of riding but today was all mine.  Yeah, it was amazing.  I rode for close to 3 hours on the Mesquite MX track in Mesquite, Nevada.  I even got blisters on the inside of my thumbs and palms from the grips through my gloves.  My white palms of my gloves turned black from the new ODI grips that come with the bike.  Yeah, I rode and it was a great day.  My bike is amazing!  Dropping down from a 450 to a 250 was different but I feel in control now.  I'm a big kid, a little over 6 feet tall and around 210 pounds so the Yamaha 250 was the bike for me.  It came factory set exactly right for me.  A guy at the track measured the sag when I was on it and you guessed it; 100% correct.  Yes sireeee!  Absolutely love it.

I was dead tired after today was finished but when we got back home first thing grandpa and I did was get the power washer out, washed off the mud and clay, lubed the chain and changed the oil again completely draining it and adding 28 ounces of Yama Lube 10W-40.  

Just a reminder, if you would like to donate to my GoFundMe Page here is the link: [click me]




Saturday, December 5, 2020

Time to Ride the Yamaha YZ250F Monster Edition - First Ride after break-in.

 I finally got the bike broke in last night with a little over 2 hours of breaking it in the right way.  I'm down here in Mesquite visiting my Grandpa and Grandma so we headed to the Mesquite MX track first thing this morning.  It's cold down here; around 30° this morning but warming up and not nearly as bad as back in Payson where it was under 20° this morning.

The 250 handles completely different than my Honda CRF450R; both the 05 and the 2017 so I'm taking it a little slow to feel out the bike.  Also, with the new bike I didn't want to push it today.


On one of the practice runs a group of us was racing up the big hill climb at Mesquite when at the top of the hill a kid behind me looped out.  All I could here is this bike winding up and all of a sudden the kid's bike was airborne and I felt it hit me in the back of my helmet.  That was close; too close.  That was lucky.  The bike was back flipping on that high hill and almost killed a guy shooting film of the riders.  It was a dangerous day at the track.  Another rider cased a double and went head over heal and totally ripped up his chin.  There was literally a flap of skin under his chin that was dangling and blood everywhere.  He was lucky that a couple of Paramedics from Vegas were riding, a guy and his girlfriend.  They had to be good people because they were both riding the Blucru - Yamahas.

I've got one more day of practice so I'll be headed to the track again tomorrow; this team pushing it a little bit more.  It's the best; it's great and I absolutely love it.  







YAMAHA - BLUCRUOFFICIAL - OH HECK YEAH!

 





BREAK-IN IS OVER - IT'S TIME TO RIDE
My grandpa and I are headed to the Mesquite MX track this morning and it's finally time to open up my brand spankin' new 2021 Yamaha YZ250F Monster Edition purchased from Mike Basso of St. George, Utah Factory Powersports.  Okay-brrr, 32 ° F this morning in Mesquite.  That's a cold morning here in the desert but it's 22° F this morning in Utah County so I'll take it. 
"LET'S DO IT!"

I'm looking for a few good financial backers and sponsors to help me and my grandpa out.  He's retired and helping all he can but sure could use some help.  If you know of anybody out there that would like to back me, no matter the amount I can really use the help.  Don't let the new bike fool you.  We sat down and put it on paper.  It's cheaper to buy new than to keep sinking in money to repair an older bike.  Anyway, I would really appreciate any help you can offer.  Click here to help GOFUNDME.

#ASV Clutch & Brake Levers

 I just finished up my 4 motos, two 250 class motos and two 450 class motos and feel like I need a lot more work on corners and also watchin...